RAMSET R150 Manuel d'utilisateur télécharger pdf (Page 4)

Fuel Cells and Batteries

Fuel Cells

• The fuel cell must be used at

temperatures between -5° C

(23° F) and 49° C (120° F).

• At the beginning of each fastening

cycle, a measured amount of gas

is injected into the combustion

chamber.

• The fuel cell is designed with an

internal reservoir that is under

pressure by a propellant.

• When the fuel cell is empty, a

small amount of propellant

remains inside the cell.

• For safety and proper tool functioning

it is important that only Ramset

supplied fuel cells be used in the

R150 tool.

Batteries

• The battery will become discharged

even if the tool is not being used.

• Remove the battery from the tool

when the tool is not to be used or

put it in the “no contact” position

in the tool as shown on page 5.

• Recharge the battery if it has not

been used for a long period of time.

• Batteries are supplied in an

uncharged condition so fully

charge them for first time use.

• Do not recharge batteries until

they are fully discharged.

• It takes about 1 hour to recharge

a battery.

• Use only batteries and chargers

supplied by Ramset.

• Battery Capacity—Maximum

1200 shots.

Ramset Fuel Cell

Ramset 6 V. Battery

SAFETY INSTRUCTIONS

DANGER

4

SAFETY INSTRUCTIONS

DANGER

1 2 3 4 5 6 7 8 9 ... 15 16

Commentaires sur ces manuels

Pas de commentaire