RAMSET GypFast G2 Instructions d'exploitation télécharger pdf (Page 8)

THE BATTERY AND CHARGING SYSTEM

INSTALLING THE BATTERY

•Insertthebatteryintothetoolasshownon

the right with the clip facing out.

•Thebatteryhastwopositionsinthetool:

1. The “OFF” position—as shown

in picture #1 to the right.

2. The “RUN” position—as shown

in picture #2 to the right.

•Tooperatethetoolbesurethebatteryis

fully inserted into the tool. After installing

the battery, note the LED light on the right

side of the handle.

•Ifthelightflashesgreen,thetoolis

powered.

• Ifthelightflashesred,thebatteryrequires

charging.

• Ifthelightissolidgreenandthefanis

running, the tool is ready to take the

next shot.

• Ifthelightissolidredandthefanisnot

on, the battery needs to be recharged.

•Ifthetoolwillnotbeusedforashort

period of time, click the battery back

into the “OFF” position. This will prevent

the tool from being fired.

• Ifthetoolwillnotbeusedforextended

periods of time, remove the battery

and store in the tool case.

NOTE:

Battery fully inserted into tool

NOTE: OFF position

shown in small window

NOTE: LED Light

OFF

RUN

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Pas de commentaire

RAMSET GypFast G2 Instructions d'exploitation Page 8